Перейти до вмісту
Ebzor

Обрати мову

العربيةAzərbaycancaCatalà中文HrvatskiČeštinaDanskNederlandsEnglishEestiفارسیFrançaisDeutschעבריתMagyarItalianoМакедонскиNorskPortuguês do BrasilPortuguêsRomânăРусскийEspañolSvenskaTürkçeУкраїнська

База знань

Open only the network ports your VPS application needs

A reachable application needs a listening process and compatible firewall rules. Changing the firewall alone does not start an application.

Follow these steps

  1. Identify the application’s documented port and protocol, and check whether it listens on the intended network interface.

  2. Keep a working SSH or console session open. Save the existing firewall rules before changing them.

  3. On Ubuntu using UFW, inspect sudo ufw status verbose. Permit your actual SSH port before enabling or tightening the firewall.

  4. Allow only the required application ports and protocols. Restrict administration ports to trusted source addresses where practical.

  5. Review any additional panel or upstream firewall, then test from outside the VPS. Recheck access from a second session.

If something does not work

Do not disable all protection to diagnose one port. If traffic still fails, send support the destination IP, port, protocol and application listening status.

Related guides

Official reference

Open client area · Contact support

Reviewed: 17 November 2026

Ця відповідь Вам допомогла?

База знань

Усі послуги

ВебхостингВебхостингВід 1,49 USDХостинг WordPressВід 1,99 USDРеселерський хостингВід 7,49 USD
СервериLinux VPSВід 2,74 USDWindows RDPВід 6,49 USDЛіцензії на програмиВід 1,99 USD
Ігровий хостингMinecraft Java / PaperВід 1,99 USDMTA:SAВід 1,24 USDSA-MP / open.mpВід 1,24 USDTerrariaВід 1,24 USDFiveMВід 2,24 USDRustВід 4,24 USDPalworldВід 9,49 USDCounter-Strike 2Від 4,99 USDValheimВід 2,99 USDCounter-Strike 1.6Від 1,24 USD
Послуги для сайтівСтворення сайтівВід 74,50 USDПеренесення сайтівВід 9,50 USDОбслуговування сайтівВід 12,49 USD
Домени

На головний екран