דילוג לתוכן
Ebzor

בחירת שפה

العربيةAzərbaycancaCatalà中文HrvatskiČeštinaDanskNederlandsEnglishEestiفارسیFrançaisDeutschעבריתMagyarItalianoМакедонскиNorskPortuguês do BrasilPortuguêsRomânăРусскийEspañolSvenskaTürkçeУкраїнська

מאגר מידע

Open only the network ports your VPS application needs

A reachable application needs a listening process and compatible firewall rules. Changing the firewall alone does not start an application.

Follow these steps

  1. Identify the application’s documented port and protocol, and check whether it listens on the intended network interface.

  2. Keep a working SSH or console session open. Save the existing firewall rules before changing them.

  3. On Ubuntu using UFW, inspect sudo ufw status verbose. Permit your actual SSH port before enabling or tightening the firewall.

  4. Allow only the required application ports and protocols. Restrict administration ports to trusted source addresses where practical.

  5. Review any additional panel or upstream firewall, then test from outside the VPS. Recheck access from a second session.

If something does not work

Do not disable all protection to diagnose one port. If traffic still fails, send support the destination IP, port, protocol and application listening status.

Related guides

Official reference

Open client area · Contact support

Reviewed: 17 November 2026

?האם התשובה שקיבלתם הייתה מועילה

מאגר מידע

כל השירותים

אחסון אתריםאחסון אתריםמאתר 1.49 USDאחסון WordPressמאתר 1.99 USDאחסון למשווקיםמאתר 7.49 USD
שרתיםLinux VPSמאתר 2.74 USDWindows RDPמאתר 6.49 USDרישיונות תוכנהמאתר 1.99 USD
אחסון משחקיםMinecraft Java / Paperמאתר 1.99 USDMTA:SAמאתר 1.24 USDSA-MP / open.mpמאתר 1.24 USDTerrariaמאתר 1.24 USDFiveMמאתר 2.24 USDRustמאתר 4.24 USDPalworldמאתר 9.49 USDCounter-Strike 2מאתר 4.99 USDValheimמאתר 2.99 USDCounter-Strike 1.6מאתר 1.24 USD
שירותי אתריםעיצוב אתריםמאתר 74.50 USDהעברת אתריםמאתר 9.50 USDתחזוקת אתריםמאתר 12.49 USD
דומיינים

הוספה למסך הבית